individual hearth tiles for fireplace Hearths

Hearth Tiles

We can supply Hearths in a variety of styles for gas or solid fuel use.

Plain Glazed Tiles

Available in high quality double-fired Fireplace Tiles. Individual plain glazed tiles are available in 4 inch or 6 inch sizes in the following colours.

Burgundy, Victorian Blue, Basalt Black, Ivory, Victorian Brown, Teapot Brown, Victorian Green, Steele Green, Midnight Blue, Mottled 942, Mottled

4 inch Plain Tile £1.90 each

6 inch Plain Tile £3.10 each

6 inch x 2 inch Plain Tile £1.90 each

6 inch x 3 inch Plain Tile £2.10 each

RE - Round Edged Glazed Tiles

Round Edged tile

Round Edged tiles are used for hearth and fireplace edges.

Round Edged tiles

REX - Round Edge Crossing Glazed Tiles

Round Edged corner tiles

Round Edged tiles used for hearth and fireplace corners

Round Edged corner tile


4 inch RE £2.40 each

6 inch RE £3.60 each

We also have a range of different kerb tiles to form a raised edge to the hearth or a fender.

Our Standard Sizes

A Standard Size Hearth is 54 inch x 15 inch x2 inch thick with or without a kick (a tongue extending back) but all other sizes are available.

What Hearth Shapes are Available?

The standard hearth shape is rectangular (a flat back hearth). These flat back Hearths are for use when the fireplace opening is level or just in front of the wall line (the front of the chimney breast).


Kicks or tongues accomodate fireplaces where the fireplace opening steps back behing the wall line of the chimney breast.

Cut Outs

A cut out is required when the fireplace system is fixed in the floor and is forward of the wall line e.g. Baxi Burnall and similar systems.

Back Hearths

if you have a large open fireplace or Inglenook Fireplace we can supply a separate Back Hearth with our stone Hearths or incorporate it into a one piece tiled hearth as long as the size is reasonable.

Fireplace Hearth Sizes

There are strict regulations governing the size of a fireplace hearth.

For a Gas Fire the Hearth must be 15 inches in front of the flame and 2 inch thick.

For Solid Fuel Fires the Hearth can be flush with the floor and less than 15 inches deep provided there is a fixed fender, otherwise it must be 15 inches in front of the fire.

For a Solid Fuel Stove the Hearth must be at least 12 inches in front of the opening door of the stove.

Once the regulations are complied with the size and shape of your hearth is down to aesthetics.

If you have exposed floorboards then the hearth should fully cover the constructional hearth to avoid seeing the concrete.

If your fireplace has a mantel then the hearth size will vary depending on whether the mantel stands on the hearth or the hearth sits between the mantel legs